Home About us Products Models News Honor Network Contact us Substation
location:Home > bush bearingNews > Self aligning ball bearing maintenance and maintenance important link

Products
More models
Deep Groove Ball Bearing
KA Nylon Retainer Bearing
Deep Groove Ball Bearing
Black Chamfer lmported Process Bearing
35 Class Spherical Roller Bearing
36 Class Spherical Roller Bearing
Lightweight Spherical Roller Bearing
Self-Aligning Ball Bearing
One Way Backstop Bearing
Self aligning ball bearing maintenance and maintenance important link
Clicks:63036 Date:12-23
The oil bath of 1. self aligning ball bearing is smooth
The smooth oil bath is the common smooth way in the most self aligning ball bearing, suitable for low, medium speed self aligning ball bearing smooth. The self aligning ball bearing is partially immersed in the tank. The smooth oil is carried by the rotating self aligning ball bearing parts, and then flows back to the oil groove. The oil surface should be slightly lower than the center of the lowest rolling body.
Smooth dripping of 2. self aligning ball bearing
The dripping oil is smooth and suitable for the quantity of smooth oil to be obtained. The self aligning ball bearing parts are obtained. The drop oil volume is suitable for every 3-8 seconds per drop, and too much oil will cause the self aligning ball bearing temperature to increase.
Smooth oil of 3. self aligning ball bearing
Use the oil pump to keep the filtered oil to the self aligning ball bearing component, and use the smooth oil after the self aligning ball bearing to filter the oil after the cooling. Because the circulating oil can take away the positive heat, the self aligning ball bearing is cooled, so this method is used for the self aligning ball bearing components with high speed.
The spray of 4. self aligning ball bearing is smooth
The oil mist can be produced by mixing the dry shrinking air with the smooth oil through the sprayer. The air flow can effectively cool down the self aligning ball bearing and avoid impurity invasion in the radiation of self aligning ball bearing. This method is suitable for the smooth self aligning ball bearing components at high speed and low temperature.
Radiological smoothness of 5. self aligning ball bearing
The low pressure oil is injected into the self aligning ball bearing by the oil pump. The oil in the self aligning ball bearing is injected through the self, aligning, ball and the other side into the oil tank. In the self aligning ball bearing high rotation speed, rolling and maintained with commensurate high rotating speed so that the surrounding air causing air flow, with individual smooth way difficult to smooth oil to the self aligning ball bearing, when necessary using a low-voltage radiation mode smooth oil spray to self aligning ball bearing, nozzle position should be placed on the inner ring and maintain central.
Previous article: Causes and maintenance measures that cause damage to self aligning ball bearing      Next article: How to prevent a fire from a self aligning ball bearing heating disassembly
Recommended reading
How to repair the self aligning ball bearing overheating problem? 2018.1.15
Causes and maintenance measures that cause damage to self aligning bal 2017.12.23
Causes and treatment methods for oil leakage of self aligning ball bea 2018.1.4
Recommended products
bearing 6310 C4 for idler
bearing 6310 C4 for idler
bearing 6309 C4 for idler
bearing 6309 C4 for idler
bearing 6308 C4 for idler
bearing 6308 C4 for idler
bearing 6307 C4 for idler
bearing 6307 C4 for idler
 
Corporate Information
Home
Abouts Us
Products
News
Honors
Substation
 
Contacts
+86 635 5638235
Fax:+86 635 5638808
Address:Xu Village Industrial Garden, Gan Town, Guan County, Shandong
 
Follow us
 
Copyright © 2017 Shandong Xinkaite Bearing Co.,Ltd.